7 Station Part Former Machine DBP-247L

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 5-8 mm and maximum length of 90mm

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 6-10 mm and maximum length of 110mm

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 8-12 mm and maximum length of 160 mm

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 10-16 mm and maximum length of 160 mm

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 12-27 mm and maximum length of 220mm

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 16-30 mm and maximum length of 220mm

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 20--30 mm and maximum length of 280mm

Mostly used for producing non-standard parts with high precision requirements and complex shapes, with a diameter of 27-36 mm and maximum length of 280mm